It
Es
FALL ARREST RAIL SDTRACK - TYPE D
Fall protection rail
The rigid rail fall arrester system of the SDTRACK range allows you to carry out maintenance tasks at height in complete safety.
The distance between the fixing brackets can reach up to 6 meters depending on the chosen configuration and the direction of use of the slide cart.
The SDTRACK range has been tested and has passed the tests required by the technical standards for the following configurations:
– USE IN FALL PROTECTION
– USE IN SOSPENSION
The rail’s profile are joinable thanks to special connectors, which can be installed near the fixing brackets or along the rail profile.
Linear device with rigid rail, can be installed and used either on the floor, wall or ceiling.
It must be fixed to a supporting substrate and has a sliding trolley along its length, as a mobile anchoring point.
Possibility of being used in retention for work at height or as a suspended work line.
Individual trolley for each worker.
The use of the system requires the use of a safety harness for work at height.
WORKING DIRECTION OF THE CART NO PERPENDICULAR TO THE TRACK FIXING SURFACE
Sistema caracterizado por perfiles de aluminio de 4 longitudes diferentes: 3,4,5 y 6 metros.
Los perfiles de deslizamiento se pueden unir mediante la juntura adecuada y se pueden montar independientemente de la distancia entre ejes de los soportes, que debe respetar las distancias máximas.
System characterised by aluminium profiles in 4 different lengths: 3,4,5 and 6 metres.
The sliding profiles can be joined by means of special joints and can be assembled independently of the bracket spacing, which must in any case respect the maximum distances.
N° MAX OPERATORS
N° MAX OPERATORS: 2
Distance between fixing brackets from 3 to 6 m.
N° MAX OPERATORS
N° MAX OPERATORS: 4
Distance between fixing brackets max 3 m.
WORKING DIRECTION OF THE CART PERPENDICULAR TO THE TRACK FIXING SURFACE.
WORKING DIRECTION OF THE CART PERPENDICULAR TO THE TRACK FIXING SURFACE.
System characterised by aluminium profiles in 4 different lengths: 3,4,5 and 6 metres. The sliding profiles are joined at the point where the brackets are assembled.
N° MAX OPERATORS: 4
N° MAX OPERATORS: 4
Distance between fixing brackets from 3 to 6 m.
N° MAX OPERATORS
N° MAX OPERATORS: 4
Distance between fixing brackets max 3 m.
USE IN SUSPENSION
Each operator needs to be anchored to both carts at the same time to work in suspension.
System characterised by aluminium profiles in 4 different lengths: 3,4,5 and 6 metres.
The sliding profiles are joined at the point where the brackets are assembled.
N° MAX OPERATORS
N° MAX OPERATORS: 2
Distance between fixing brackets max 1,5 m.
REQUEST INFO REQUEST INFO REQUEST INFO 
