It
Es
SDLAM-AL RANGE – TYPE C HORIZONTAL FLEXIBLE LIFELINE
Life Lines - Sheet metal roofs - type c - Line with steel cable
The SDLAM-AL range is designed, tested and produced for applications on sheet metal roofs, both flat and inclined, of the corrugated type (sandwich or bare sheet) or synthetic tiles.
The range has two end anchoring supports each composed of a standard anchoring plate, adaptable to the various sheet metal roofs, and an end element to which the line components can be fitted.
The upper fixing is carried out with rivets supplied with the device, already tested on simulated supports in the field.
The visual impact is greatly reduced thanks to the minimum thickness of the anchoring plates and the installation is made simple and fast by the single type of existing plate, adaptable to the various corrugations with multiple holes present through rivets.
COMPLETE LIFELINE
The lifeline consists of two end anchors and a kit provided to form a flexible horizontal line with a single span. The cable is not included and is to be added with the required amount of metres.
To form multi-span lifelines, in addition to the necessary cable size, it is essential to add to the order the number of intermediate anchoring devices necessary.
Applications:
- Steel sandwich panel min. thickness 4/10 – pitch 25
- Bare steel sheet minimum thickness 6/10 – pitch 25
- Bare steel sheet minimum thickness 6/10 – pitch 7.5/11
- Steel sheet with insulation minimum thickness 5/10 – pitch 11
| RANGE | SDLAM-AL, lifelines for corrugated roofs |
| MODEL NAME | SDLAM-ALKIT |
| MATERIAL | Light alloy |
| CERTIFICATIONS | EN 795:2012 – CEN/TS 16415:2013 |
| CODE | SDLAM-ALKIT |
| TYPE | C |
| APPLICATIONS | Sheet metal roofing |
| LIFE SPAN | 30 years |
| MAX N° OPERATORS | 3 |
| DESCRIPTION | Horizontal flexible lifeline for sheet metal roofs with single standard support |
SDLAM-AL END SUPPORTS
Base plate for fixing on sheet metal roofing of permitted thicknesses and shapes, by means of supplied rivets, directly to the extrados of the sandwich/sheet panel. Dimensions 55x23cm.
Equipped with a plate that allows the base plate to be joined to the line element (absorber/tensioner) by means of bolts included. The connecting plate is supplied already bent with a height of 14cm.
SDLAM-AL RANGE COMPONENTS
PATENTED CABLE TENSIONING SYSTEM
ENERGY ABSORBER
Helical in shape with 8 mm coils, it dissipates the stresses induced by the fall of the system user, reducing the impact force on the end anchors.
TENSIONER WITH BUILT-IN CABLE CLAMPING TERMINAL
Model with built-in cable clamping terminal, in light alloy, necessary to obtain a correct adjustment of the cable tension and fix it in the free end. A tensioner is required for each flexible line. It is installed directly between the head of one of the two end supports, i.e. the head eyebolt, and the free end of the cable. Using this model, the cable clamping terminal is not necessary.
RIVETS
18 rivets are required for each fixing plate. Supplied with 20 rivets for each base, for a total of 40 rivets per kit.
ASSEMBLY BOLTS
Necessary to connect the base plate and the connection plate.
SEALS
3 (23×2.5cm) EPDM expanded meshed adhesive that attaches directly on each corrugation to create waterproof protection, also necessary to avoid direct contact between the extrados of the support and the intrados of the fixing base plate.WARRANTY SEAL
It shows the system number. It guarantees proof that the tensioner has not been used, therefore that the cable has not been uninstalled and reassembled by unauthorised personnel. At each inspection or maintenance operation on the system, its replacement with the registration of the new identification number proves that the check has taken place.
IDENTIFICATION PLATE
Necessary to record inspections or maintenance in permanent systems, any notes and system references.
SDLAM-AL INTERMEDIATE SUPPORTS
Base plate for fixing on sheet metal roofing of permitted thicknesses and shapes, by means of supplied rivets, directly to the extrados of the sandwich/sheet panel. Dimensions 55x23cm.
Equipped with a plate that allows the base plate to be joined to the line element (absorber/tensioner) by means of bolts included. The connecting plate is supplied already bent with a height of 14cm.
AISI 316 stainless steel eyebolt with self-locking nut M12 in A2/70, for cable passage.
| SDLAM-ALINT |
CABLE FOR LINEAR ANCHORING DEVICES
AISI 316 Stainless steel cable with 8 mm rated diameter composed of 7 strands each of 7 wires.Supplied with one end already crimped, the other to be tightened during installation by means of the cable tightening terminal incorporated in the tensioner.
Identification and traceability of the product: to show the high quality and seal, the cable has inside a tape marked Sicur Delta; on the crimp made in the workshop are imprinted the registered trademark SD, the lot number of the cable and the dimension.
| Stainless steel | |
|---|---|
| SD00700A |
REQUEST INFO REQUEST INFO REQUEST INFO 
