It
Es
POLE + SWIVEL HEAD / DOUBLE HEAD
Life Lines - STRUCTURAL ANCHORS - TYPE A - Point anchorage
By assembling the desired head element on the necessary pole-type support, it is possible to obtain a TYPE A point anchorage that can be installed on flat, inclined and/or ridge roofs.
With the combination with swivel head it is possible to work 360° around the device
| RANGE | SD76 |
| NAME MODEL | POLE + SWIVEL HEAD / DOUBLE HEAD |
| MATERIAL | Stainless steel / S235 Hot-dip galvanized |
| CERTIFICATIONS | EN 795:2012 – CEN/TS 16415:2013 |
| TYPE | A |
| APPLICATIONS | Reinforced slab, reinforced concrete, wood, steel |
| LIFE SPAN | 30 years |
| MAX N° OPERATORS | 2 |
| DESCRIPTION | Point anchorage with 1 fixing hole |
FLAT BASE SUPPORT
Pole support element with flat base, to which the head element must be assembled to form the complete support.
Flat base plate with a plan size of 15×25 cm, the tubular is made with a circular section hollow profile (outer diameter 76 mm).
Used for fixing on structures with flat extrados such as reinforced concrete beams and bond beams, wooden beams and steel supports. The base is fixed on the extrados of the structure. Counterplates of different conformation are available, among which there is the identical size to the base both in size, thickness, and perforations.
| Stainless steel | |
|---|---|
| SD76015A | 15cm |
| SD76035A | 35cm |
| SD76050A | 50cm |
| SD76060A | 60cm |
| S235 Hot dip galvanized | |
|---|---|
| SD76015Z | 15cm |
| SD76035Z | 35cm |
| SD76050Z | 50cm |
| SD76060Z | 60cm |
RIDGE BASE POLE
Pole support element with a single 16.7° inclination base, used as a component for type C linear anchoring devices, to which the head element must be assembled to form the complete support.
Base plate with a plan size of 24.5×24.5 cm, the tubular is made with a circular hollow section profile (outer diameter 76 mm).
Used for fixing on structures with flat extrados such as reinforced concrete beams and bond beams, wooden beams and steel supports. It is most commonly used on roofing ridges.
| Stainless steel | |
|---|---|
| SD76C35A | 35cm |
| SD76C50A | 50cm |
| SD76C60A | 60cm |
| S235 Hot dip galvanized | |
|---|---|
| SD76C35Z | 35cm |
| SD76C50Z | 50cm |
| SD76C60Z | 60cm |
PITCH BASE POLE
Pole support element with a single 16.7° inclination base, used as a component for type C linear anchoring devices, to which the head element must be assembled to form the complete support.
Base plate with a plan size of 15×25 cm, the tubular is made with a circular hollow section profile (outer diameter 76 mm).
Used for fixing along inclined surfaces, on structures such as reinforced concrete beams and bond beams, wooden beams and steel supports. Possibility of fixing through counterplates of different conformation, among which there is the identical size to the base both in size, thickness, and perforations.
| Stainless steel | |
|---|---|
| SD76F35A | 35cm |
| SD76F50A | 50cm |
| SD76F60A | 60cm |
| S235 Hot dip galvanized | |
|---|---|
| SD76F35Z | 35cm |
| SD76F50Z | 50cm |
| SD76F60Z | 60cm |
SWIVEL HEAD ELEMENT
With the combination with swivel head it is possible to work 360° around the device.
Compatible with pole-type support elements.
| S235 stainless steel | |
|---|---|
| SD00100Z |
| 304 Stainless steel | |
|---|---|
| SD00100A |
POLE DOUBLE HEAD ELEMENT
Consisting of a plate equipped with a central hole for assembly to the pole-type support element, by means of a tightening bolt supplied with the latter.
It is used in 2 cases:
– To form end supports of the TYPE C linear anchoring device, where on the same pole-type element an anchoring line ends and another restarts, being made up by two perforated ends, one in the front and one in the back, for the insertion on one side of the energy absorber and on the other of the tensioner.
-To form end supports of the TYPE C linear anchoring device by its perforated end, while from the other that remains free it is possible to connect directly through EN 362 connector so as to have the function of a TYPE A point anchoring device.
| Stainless steel | |
|---|---|
| SD00300A |
| S235 Hot dip galvanized | |
|---|---|
| SD00300Z |
POLE SINGLE HEAD ELEMENT
Consisting of a plate equipped with a central hole for assembly to the pole-type support element, by means of a tightening bolt supplied with the latter.
It is used to form end supports of the TYPE C linear anchoring device (horizontal flexible anchoring line). The perforated end in the front is used for the insertion of the energy absorber and/or tensioner.
| Stainless steel | |
|---|---|
| SD00200A |
| S235 Hot dip galvanized | |
|---|---|
| SD00200Z |
REQUEST INFO REQUEST INFO REQUEST INFO