It
Es
The system is designed to minimise the visual impact, making it perfect for situations where the appearance of buildings such as historic centres must be safeguarded.
Line length:
Minimum span: 3m
Maximum span: 15m (need for intermediate support)
| RANGE | SD76 |
| CÓDIGO | CENTRO STORICO line, lifelines for structural fixings type c |
| MATERIAL | Hot-dip galvanised steel S235 |
| CERTIFICATIONS | UNI EN 795:2012, CEN/TS 16415:2013 |
| CODE | SD00300Z – Galvanised steel S235 |
| CODE | SD00300A – 304 STAINLESS STEEL |
| TYPE | C |
| APPLICATIONS | Installation on ridge. Possibility of direct fixing on steel, wood and reinforced concrete structures |
| MAX N° OPERATORS | 4 |
END HEAD
In the two holes at both ends of the centro storico element, it is possible to assemble two single heads, in stainless steel or galvanised steel depending on the material chosen for the element itself. In this way, a single element representing the end head of the system is obtained.
INTERMEDIATE SUPPORT
To obtain the intermediate support, it is sufficient to assemble in the two holes at both ends of the centro storico element, two intermediate heads, in stainless steel or aluminum alloy, depending on the material chosen for the element itself.
HORIZONTAL FLEXIBLE LINE COMPONENT KIT TYPE C
Single packaging where the components necessary to form the TYPE C horizontal flexible lifeline are included, in accordance with the reference technical standard as well as laboratory tests.
Composed of:
ENERGY ABSORBER
AISI 302 Stainless steel with a helical shape, it has the function of dissipating the stresses induced by the fall of the user of the system, reducing the impact force on the end anchors. It is installed directly between the head of the support and the cable. It bears Sicur Delta marking on both forks to ensure product traceability.
TENSIONER
Two-welded forks with closed cantilever in AISI 316 stainless steel, necessary to obtain a correct adjustment of the cable tension. It is installed directly between the head of the support and the cable clamping terminal. In both threaded pins there are holes to affix the warranty seal. It bears Sicur Delta marking to guarantee product traceability.
CABLE CLAMPING TERMINAL
With internal ogive to ensure greater tightness than the tensile strength of the cable itself. in AISI 316 stainless steel Since the use of U-clamps is abolished by the product technical standard EN 795:2012, it is a system that increases its tightness with the progressive increase in the traction imposed on the cable. Laboratory tested both on the entire system and in tensile tests with only the cable installed.
WARRANTY SEAL
It shows the system number. It guarantees proof that the tensioner has not been used, therefore that the cable has not been uninstalled and reassembled by unauthorised personnel. At each inspection or maintenance operation on the system, its replacement with the registration of the new identification number proves that the check has taken place.
IDENTIFICATION PLATE
Necessary to record inspections or maintenance in permanent systems, any notes and system references.
INSTALLATION, USE AND MAINTENANCE MANUAL
| Stainless steel | |
|---|---|
| SD001000 |
REQUEST INFO REQUEST INFO REQUEST INFO 
