It
Es
FLAT LINE
Life Lines - STRUCTURAL ANCHORS - TYPE C - Line with steel cable
The supports of the FLAT LINE are characterised by:
- versatility
- reduced footprint at the base
- possibility of fixing to vertical, horizontal and inclined surfaces and to the intrados structure, with the device upside dow
- reduced visual impact
They also allow installation on load-bearing structures with reduced dimensions and the design of systems positioned above the operator’s head, guaranteeing in many situations to be able to operate with a “0” fall factor.
The double-sail Flat line consists of several elements from whose assembly a flexible horizontal line is obtained:
- Double sail type support elements
- Lifeline components for TYPE C structural fasteners (tensioner, absorber, cable clamp)
- Stainless STEEL cable
Each support element must be assembled with the components of the SD76 range to form the complete system. The intermediate element is made with a tubular and a circular section hollow profile whose outer diameter is 76 mm, on which a curved/intermediate crosspiece head is assembled.
| RANGE | SD76 |
| MODEL NAME | FLAT line, lifelines for type C structural fixing |
| MATERIAL | S235 hot-dip galvanised |
| CERTIFICATIONS | EN 795:2012 – CEN/TS 16415:2013 |
| CODE | Component codes listed below |
| TYPE | C |
| APPLICATIONS | Masonry, reinforced concrete, wood, steel |
| LIFE SPAN | 30 years |
| MAX N° OPERATORS | 4 |
| DESCRIPTION | Horizontal flexible line formed with double sail type supports. |
DOUBLE SAIL SUPPORT
Used as an end support, it does not require the assembly of any head element. The presence of a double anchor point allows the closure and restart of two distinct horizontal flexible lines.
Applications: Masonry, reinforced concrete, wood, steel
| S235 Hot dip galvanized | |
|---|---|
| SD00910Z |
INTERMEDIATE SAIL SUPPORT
Impiegato come supporto rompitratta, con elemento di testa in dotazione già assemblato. Risulta idoneo per installazioni su superfici verticali, inclinate ed orizzontali con possibilità di fissaggio anche all’intradosso della struttura.
Applicazioni: Murature, cemento armato, legno, acciaio
| S235 Hot dip galvanized | |
|---|---|
| SD00920Z |
HORIZONTAL FLEXIBLE LINE COMPONENT KIT TYPE C
Single packaging where the components necessary to form the TYPE C horizontal flexible lifeline are included, in accordance with the reference technical standard as well as laboratory tests.
Composed of:
ENERGY ABSORBER
AISI 302 Stainless steel with a helical shape, it has the function of dissipating the stresses induced by the fall of the user of the system, reducing the impact force on the end anchors. It is installed directly between the head of the support and the cable. It bears Sicur Delta marking on both forks to ensure product traceability.
TENSIONER
Two-welded forks with closed cantilever in AISI 316 stainless steel, necessary to obtain a correct adjustment of the cable tension. It is installed directly between the head of the support and the cable clamping terminal. In both threaded pins there are holes to affix the warranty seal. It bears Sicur Delta marking to guarantee product traceability.
CABLE CLAMPING TERMINAL
With internal ogive to ensure greater tightness than the tensile strength of the cable itself. in AISI 316 stainless steel Since the use of U-clamps is abolished by the product technical standard EN 795:2012, it is a system that increases its tightness with the progressive increase in the traction imposed on the cable. Laboratory tested both on the entire system and in tensile tests with only the cable installed.
WARRANTY SEAL
It shows the system number. It guarantees proof that the tensioner has not been used, therefore that the cable has not been uninstalled and reassembled by unauthorised personnel. At each inspection or maintenance operation on the system, its replacement with the registration of the new identification number proves that the check has taken place.
IDENTIFICATION PLATE
Necessary to record inspections or maintenance in permanent systems, any notes and system references.
INSTALLATION, USE AND MAINTENANCE MANUAL
| Stainless steel | |
|---|---|
| SD001000 |
CABLE FOR LINEAR ANCHORING DEVICES
AISI 316 Stainless steel cable with 8 mm rated diameter composed of 7 strands each of 7 wires.Supplied with one end already crimped, the other to be tightened during installation by means of the cable tightening terminal incorporated in the tensioner.
Identification and traceability of the product: to show the high quality and seal, the cable has inside a tape marked Sicur Delta; on the crimp made in the workshop are imprinted the registered trademark SD, the lot number of the cable and the dimension.
| Stainless steel | |
|---|---|
| SD00700A |
REQUEST INFO REQUEST INFO REQUEST INFO 
