SD20DEF RANGE WITH DEFORMABLE SUPPORTS FOR STRUCTURAL FIXINGS

In AISI 316 stainless steel, necessary to obtain a correct adjustment of the cable tension and fix it in the free end. A tensioner is required for each flexible line. It is installed directly between the head of one of the two end supports, i.e. the head eyebolt, and the free end of the cable.
 It bears Sicur Delta marking to guarantee product traceability. Since the use of U-clamps is abolished by the product technical standard EN 795:2012, it is a system that increases its tightness with the progressive increase in the traction imposed on the cable.

With internal ogive to ensure greater tightness than the tensile strength of the cable itself. in AISI 316 stainless steelSince the use of U-clamps is abolished by the product technical standard EN 795:2012, it is a system that increases its tightness with the progressive increase in the traction imposed on the cable.

Laboratory tested both on the entire system and in tensile tests with only the cable installed.

Installation, use and maintenance manual, warranty seal and nameplate

The small hole is suitable for the installation of the accessory with the Marte point device, in the only STAINLESS steel variant equipped with an unscrewable head eyebolt, and for all the supports of the SD20DEF RANGE. In fact, both stems of these devices have a diameter of 20, which allows the sheath to adhere perfectly, guaranteeing total waterproofing.

AISI 316 Stainless steel cable with 8 mm rated diameter composed of 7 strands each of 7 wires.Supplied with one end already crimped, the other to be tightened during installation by means of the cable tightening terminal incorporated in the tensioner.
Identification and traceability of the product: to show the high quality and seal, the cable has inside a tape marked Sicur Delta; on the crimp made in the workshop are imprinted the registered trademark SD, the lot number of the cable and the dimension.

For intermediate devices, as an alternative to the classic eyebolt head, it is possible to provide an intermediate cable gland head, which is designed to allow the operator to pass with the help of the shuttle PPE, without carrying out hooking and unhooking operations as in the case of the use of a carabiner.